نکات آموزشی اینترنت

On the Login page:
a.   Enter admin in the Username field.
b.   Enter password in the Password field.
c.   Click the Login button.  The System Basic Setup page appears.
 

1. On the top menu, click the Wireless Setup tab.
2. On the left menu, click Advanced.  The Advanced Settings page appears.
3. On the Advanced Settings page:
   a.   Wireless Mode -  Click the drop-down menu, and select B/G mixed.  This setting will disable 802.11n wireless functionality.
   b.   Click the Apply button.

    

   

    

4. On the left-hand menu, click Basic.  The System Basic Setup page appears.
5. On the System Basic Setup page:
   a.   Wireless Network Name (SSID) - Enter the desired network name of choice, or leave at the current setting.
   b.   Security Mode - Click the drop-down menu, and select WEP.  

   c.   Key Number - Keep at default, 1.  

   d.   Key Length - Click the drop-down menu, and select 64-bits or 128-bits.
   
         NOTE:  Select 64-bits for backward compatibility or 128-bits for maximum WEP security.  In the example below, 64-bits is selected.
   
   e.   Key - Enter the desired WEP key (wireless password) to use.  The WEP key must be 10 characters for 64-bit, or 26 characters for 128-bit.. 
   
         NOTE 1:  WEP keys use hexadecimal characters, which are 0 - 9 and a - f.  For best security, it is recommended to avoid the use of all the same characters.  
   
         EXAMPLES:
         64 bit: 02468ace02
         128 bit: 0123456789abcdef0123456789
           
         NOTE 2:  Make a note of this password, as it will be needed for the wireless client(s) to connect.
   
   f.   Click the Apply button.
   
         NOTE: A reboot of the unit is not required for changes to take effect.
    

   

The TG862 is now configured to allow wireless client connections using WEP encryption.

To make a connection, the wireless client must have WEP encryption enabled and have the same WEP encryption key as the Motorola Wireless Gateway.  For assistance with the wireless client,